Really sharp, but yet gentle: These Cutting Mills adapt to your samples



Universal Cutting Mill
Universal Cutting Mill
PULVERISETTE 19 with
variable rotational speed
adjustment
Both models of the new Universal Cutting Mills from FRITSCH are ideal for size-reduction for a wide range of diverse materials due to variable adjustment of the rotational speed of the rotor, different rotors with various knife geometries, replaceable blades, practical sieve cassettes and that with an unmatched ease of cleaning.

New: Wear-free labyrinth seals made of stainless steel on both sides of the rotor - on the shaft and in the lid - offer effective contamination protection and no additional heat effect for your samples. They can be removed for fast, residue-free cleaning.

Variable 300-3000 rpm for fine comminution

The high-speed Universal Cutting Mill PULVERISETTE 19 comminutes up to 60 l/h of soft to medium-hard sample materials and fibrous materials at a torque of up to 30 Nm with reliable reproducible results. The great advantage: The variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm enables fine tuning of the comminution process for each sample within a very wide range of applications.

Variable 50-700 rpm for powerful comminution

The low-speed Universal Cutting Mill PULVERISETTE 19 with variable rotational speed adjustment between 50-700 rpm in increments of ten and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution of hard, tough-elastic samples and small sample quantities. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided.

Especially for analytical sector, food and pharmaceutical industry

The Universal Cutting Mill PULVERISETTE 19 is also available in both variable rotational speed versions in a corrosion-resistant stainless steel 316L version. All materials have an increased resistance to alkalis and acids and are conform to the guidelines of the food and pharmaceutical industry.

Optimal sample exhaustion: FRITSCH Cyclone separators

Clean, convenient, cool: Combine your FRITSCH Universal Cutting Mills PULVERISETTE 19 with a FRITSCH Cyclone separator for sample exhaustion and an exhaust system which can be ordered along. The strong airflow ensures simple feeding, increases throughput, reduces the thermal load of the samples and enables the use of finer sieve cassettes to achieve a higher final fineness - even for materials, which are otherwise difficult to comminute finely. The result: an especially fast and efficient comminution.

High-performance Cyclone separator
Universal Cutting Mill
PULVERISETTE 19 with new
FRITSCH high-performance
Cyclone separator
Choose according to your needs: FRITSCH high-performance Cyclone separator

The FRITSCH high-performance Cyclone separator completely made of stainless steel 304 is particularly indispensable in the analytical sector and in the food and pharmaceutical industries, and for the processing of heterogeneous mixtures of material, e.g. in the cement industry and due to its high surface quality, it offers enhanced resistance to corrosive media such as alkalis and acids and is especially easy to clean with a wide range of possible cleaning agents, without leaving any residues. In addition, it can be completely dismantled, fully emptied, flooded and sterilised, and thus offers reliable protection against cross-contamination.

The FRITSCH high-performance Cyclone separator is available with both: flexible or solid piping made of stainless steel 304 and special seals.

FRITSCH small volume Cyclone separator

Especially for exhaustion of small sample quantities, we designed the compact FRITSCH small volume Cyclone separator. It is made of plastic, can be dismantled completely and cleaned in a dishwasher for reliably preventing contaminations. The comminuted sample is collected in a screwed-on sample glass of 250 or 500 ml volume.

Cleaning-Video Cutting Mills
Video: Cleaning of FRITSCH
Cutting Mills - fast, easy, safe!
Clean Design for unmatched ease of cleaning

Available only from FRITSCH: For residue-free cleaning all grinding parts of our Cutting Mills can be removed within seconds without tools - unbeatable fast, simple and efficient.

The result: A completely open, empty grinding chamber with minimised dead space and smooth interior walls for quick and easy cleaning and reliable protection against cross-contamination.

Convince yourself of the unmatched ease of cleaning in our video.

Test the FRITSCH Cutting Mills

Send us your most difficult sample - we will carry out an individual sample grinding for you. Compare for yourself!

» further information for fine size-reduction with variable rotational speed 300 - 3000 rpm

» further information for powerful size-reduction with variable rotational speed 50 - 700 rpm


analytica in Munich from 10/19 - 10/22/2020

Visit us at hall A1, booth 521

(Advert)


FRITSCH GmbH
Milling and Sizing
Industriestrasse 8
D-55743 Idar-Oberstein

Fon: +49 6784 70-150
Mail: Contact Contact
Web: www.fritsch-international.com